"A Guide To Ghost Immobiliser Problems In 2023

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized possession from theft. It is discreet and does not require any additional key fobs.

The device makes use of buttons on your vehicle (steering wheels doors, door panels and the centre console) to create a unique pin code sequence that can be changed up to 20 times. This will allow your vehicle to start.

Simple PIN code Change Process

Many owners are upgrading their security because of the rise in vehicle theft. There are many kinds of aftermarket security devices, from tracking systems to alarms and immobilisers. However there are a few that are equally efficient in protecting your vehicle. While a tracking system can help you find your car in the event of theft, it will not prevent the crime from happening in the first instance. Immobilisers, in contrast, do exactly what is a ghost immobiliser they claim on the tin - they shut down the motor of your car to prevent it from being started. The Autowatch Ghost 2 immobiliser is one of the most advanced options available, making it virtually impossible for thieves to steal your vehicle.

The ghost device utilizes the buttons on your car to create an unique sequence that needs to be entered to allow the engine to begin. This can be accomplished using the indicator stalk or window buttons. Additionally it is possible to use an app for mobile devices that can function as an emergency PIN code bypass and allow the driver to operate the car without using the button sequence. This feature is particularly useful if you need to hand your car over to a valet service or parking because the immobiliser will remain activated, but not disabled.

The Ghost is a truly unique and ingenious device that is used in conjunction with the buttons of your car instead of being a separate unit. It's not just an effective deterrent to theft of your vehicle, but it can also be used on any future vehicles you own. This makes it a much better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is an advanced security system that protects your vehicle from key cloning, hacking and ECU swapping. It's a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to stop the motor. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to ensure that it works with all vehicles. It is also indestructible to jamming devices which is an approach used frequently by thieves to bypass existing immobilisers.

The advantage of using CAN data is that it operates silently when compared to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons on your vehicle, like the steering wheel, centre console or door panels, to create a a unique disarming sequence. You can make this sequence up to 20 presses long for added security. The iPhone app allows one, authorized connection using a pairing code that is unique to the Ghost and the communication between the two devices is encrypted.

The Ghost also prevents car thieves from adding an additional key or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run when a valid PIN code has been entered. It is able to be operated temporarily in valet or service mode (with parameters set, such as 30mph speed limit), so you can hand your car to valet or service without having to enter a code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that is able to be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts signals to stop your car from starting up normally until you enter a customized code. The system can be turned on and off by using your smartphone's app without the need for additional wires.

Standard factory immobilisers for automobiles function through a transponder built into the key, which sends a signal to the ECU. The car will begin to start if the correct code is transmitted. However, if a transponder from a different vehicle is used instead, the immobiliser will not recognize it. This enables the vehicle to start and be stolen. A South African company that is at the forefront of safety systems technology created the Ghost immobiliser. It shields you from key cloning or hacking, and even key theft. The only way a thief could steal your car is physically towing it away, and even then they wouldn't be able to drive it.

Ghost utilizes the buttons of your car, such as the indicator stalk as well as the steering wheel and door panels to create an individual, changeable PIN code sequence that must be entered prior to you are able to use your car. This is not required to use extra hardware such as keys-fobs, and can be up to 20 presses long. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals, which means thieves cannot utilize sophisticated RF scanning or code grabbing technology to detect that a security system has been installed.

Contrary to physical anti-theft devices such as wheel locks or clamps, Ghost is concealed within the vehicle to ensure that it can't be disabled or removed by thieves. It is even more difficult to get rid of than a car alarm, which requires disarming using a button sequence. This makes it a fantastic alternative to an GPS tracking device, which can be used to locate your vehicle after it's been taken.

Emergency PIN code override

You do not have to go far on social media to see stories or even videos of vehicles that have been stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow them to start your vehicle without the original key fobs.

The Ghost immobiliser was specifically designed to prevent this and offer an additional layer of security to protect your vehicle from being targeted by thieves. It creates a unique pin code by pushing the buttons on your steering wheel, door panel and on the centre console. The unique pin code is entered along with the original key fob to stop the engine from starting. The unique override pin can be found on a black plastic card which you will receive following the installation. It is easy to remember since there aren't any LED indicators.

The device is hidden inside the vehicle's wires and doesn't emit any radio signals, so it can't be recognized by criminals with diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to a tracker.

Contrary to most security systems, which have a relay in the engine bay, CANBUS Immobilisers communicate with the car's ECU and Ghost 2 Immobiliser BCM via the CAN data bus (brand dependent). This allows them to block a vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm or tracker to these systems, but this has to be specified prior to installing the device. They are also compatible with valet/service modes and an excellent alternative to a tracking device when you bring your vehicle to the dealer for repairs to an electrical problem.

Service/Valet mode

In recent times, there has seen an increase in the number of cars being stolen from owners without keys. With the ease of access to key cloning equipment & door lock pick sets it is now easier than ever for thieves to steal your prized possessions. We have developed the Autowatch ghost immobiliser installers near me Immobiliser to combat this. It blocks your car from being driven, even if your keys have been copied.

It directly communicates with your car's ECU (Engine Control Unit) via the CAN data loop. It's completely silent since it doesn't use radio frequencies or a key fob. It can't be detected by diagnostics or any other hacking device. It also shields against the possibility of adding the key to a new one or replacing the ECU to get around the system since only the correct PIN code can allow the engine to start.

The device is hidden within your car and can be accessed by existing buttons on your steering wheel, the centre console and door panels. Before you can begin your car, you need to enter a unique and changeable PIN code that can be as long as 20 numbers.

This is the first aftermarket CAN bus immobiliser that has been created. It will prevent your vehicle from being started or driven in the event that you do not enter a PIN code before entering. If you're driving away with the device armed it will display an indicator on your dashboard and flash continuously for approximately 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to function normally. If you do not enter your PIN at this point the indicator will continue to flash and require a new PIN every time you try to start your car.